Change a Propane Tank
Propane fueled forklifts are commonly utilized in warehouses. The lift truck is made with the propane tank mounted behind the driver. The tanks, that look much like beer kegs, need to be replaced every so often as they have a limited lifespan. Forklift operators should always utilize care when handling propane tanks. Compressed gases are dangerous, specially since the gas is flammable. Use care when replacing and removing propane tank to prevent injury.
1 If there is a need to change the propane tank, the first step is to stop the forklift, then turn the tank valve off. The forklift must be left on until the engine dies. This procedure burns off the gas in the transfer hose which connects the tank and the engine. Prior to taking the next steps, wear the proper safety equipment, like for example insulated gloves made of either leather or neoprene. It is essential for you to protect your skin from touching the compressed gas, which is very cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When putting in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to froth around the value. If this happens, inspect the valve area and the connection hose at the nut. The connecting nut must be re-tightened if you detect any leaks around the valve area, and afterward do the leak inspection procedure all over again. Persistent leaks mean that both the connecting hose and nut would have to be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank would have to be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. Afterward you can start the forklift and resume working.