Most of the time, businesses will spend a lot of money to purchase their forklifts. It is vital, therefore to take good care of your machinery to protect your investment into the long run. It is really a good idea to know the procedures which are carried out in the maintenance and care of this piece of equipment.
By starting up the forklift and listening closely how it runs is one of the best ways to tell how good the engine is running. For example, if there are any knocks or misses, the machinery is faulty and this must raise several issues. Also listen carefully for any squealing sounds that come from the belts as these sounds will provide you with a wealth of information.
Some of the main parts requiring attention during maintenance comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any faulty parts or burnt out light bulbs must be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals should be cleaned after the above components have been checked thoroughly. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery has to be inspected so as to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter should be regularly replaced. Before fitting them, be sure to write the date on the new filters by using a permanent marker in order to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle needs to be done. If there is a grease fitting on the axle make sure to apply some grease. Inspect the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect each and every other part of the machine including the wheels. If any type of problem or fault is detected, be sure to deal with it immediately so as to make sure the machine is working at its safest and optimum levels.