Used Cushion Tire Forklift Glendale - Forklift trucks are commonly classified by the kind of work they complete as well as the kind of tire they use. There are two main kinds of tire classification for forklifts, pneumatic and cushion tire.
There are drawbacks and benefits to both pneumatic and cushion forklift tire options. The cushion tire benefits and drawbacks can only be understood in the context of what the pneumatic tire offers in terms of forklift operation.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These kinds of forklift tires are cheaper to make and easier to maintain. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. Pneumatic tires provide better traction compared to cushion tires; especially on wet surfaces and outdoor locations.
Cushion tires forklifts are commonly used for organizing inventory, moving items to and from different loading docks, unloading shipments and similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The solid resilient pneumatic tires are comprised entirely of rubber and the standard air pneumatic tires feature a layered rubber design filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Cushion tire forklifts can be used inside and outside on smooth surfaces. The forklift designed for use with cushion tires, is intended to be used mostly indoors, with some limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Since cushion tire forklifts do not need to house a larger internal combustion engine, they are more compact and easier to maneuver.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
Durability is a key feature with cushion tire forklift models as they are simple to maintain and offer zero to little risk of being punctured.
4) Quiet
Cushion tire forklifts do not use an internal combustion engine and instead rely on a battery or fuel cell, making them significantly quieter than their propane or diesel cousins.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. Axles and tires are specific to a forklift frame and lifting capacity. Most forklift manufacturers design forklifts to operate safely with specific wheels and tires, namely cushion tires or pneumatic tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are popular for a variety of job sites. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Cushion tire forklifts typically feature a smaller frame and sit much lower to the ground compared to pneumatic tire models. Cushion tire models can fit through doorways easier and avoid overhead obstacles. It is important to note that cushion tire forklifts showcase less ground clearance and the machine may get caught up on exterior obstacles if the ground is uneven. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. This makes cushion tire forklifts ideal for warehouses and manufacturing facilities that have less space. Locations that rely on narrow aisles will benefit greatly from the smaller cushion tire forklifts and their tight turning capabilities. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Pneumatic tires forklifts have air in them and are better for outdoor use such as in yard work or on gravel. Pneumatic tires can also be used inside but do not provide the advantages of low clearance, maneuverability or small turning radius. Pneumatic tire forklifts operate with an internal combustion engine and these harmful emissions are dangerous for use indoors. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
The solid pneumatic tire costs more compared to the air pneumatic tire. The solid pneumatic tire has no air inside and is made from solid rubber. This design makes the tire stronger against punctures or gouges. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Air pneumatic tires work great outside on gravel and asphalt applications. However, air pneumatic tires are susceptible to being punctured or gouged. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Air tires are also known to give a bouncy ride, contributing to operator discomfort and fatigue. Therefore, many air pneumatic tire forklift users prefer to foam fill their tires. This provides a smoother ride for the operator than the one experienced on solid pneumatic tires but also a less bouncy ride than air filled pneumatic tires. Foam filling is also used to help prevent flat tires. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Some electric powered cushion tire forklifts do have lift limits. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. Load capacities come in a wide range - from less than 2,000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
